JL Audio XDM400/4 Amplifier Specs

JL Audio XDM400/4 Amplifier Specs

Height (H)2.05 in / 52 mm
Width (W)8.52 in / 216 mm
Depth (D)7.09 in / 180 mm
Net Weight6.3 lb / 2.86 kg
Power Specs @ 14.4 V
Power Specs @ 12.5 V
Power Specs @ 14.4 V
@ 4 Ω75 W RMS x 4
@ 2 Ω100 W RMS x 4
Bridged @ 4Ω200 W RMS x 2
Power Specs @ 12.5 V
@ 4 Ω60 W RMS x 4
@ 2 Ω90 W RMS x 4
Bridged @ 4Ω180 W RMS x 2
 
General Specs
Signal Processing
General Specs
Frequency Response12 Hz - 22 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power>104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W>84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω>150 / 50 Hz
Damping Factor @ 2 Ω>75 / 50 Hz
THD+N @ Rated Power<1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs200 mV - 4 V RMS
Min.Copper Power / Ground Wire Gauge4 AWG wire
Fuse Rating40 A (AFS, AGU or MaxiFuse™)
Signal Processing
Filter Mode(s)Low-Pass or High-Pass
Filter Slope(s)12 dB/octave
Filter Frequency Range50 Hz - 500 Hz
Detented, Calibrated Filter Freq. PotentiometersYes
Filter Defeat FunctionYes
Remote Level ControlOptional HD-RLC or MHD-RLC (water-resistant)
Remote Level Modes2 or All channels
Channel Input Mode SwitchYes (2/4 ch.)
Pass-Through Preamp OutputBuffered
Source Channel Selection for PreOutsYes
 
FIND THIS PRODUCT HERE