JL Audio MHD600/4 Amplifier Specs

JL Audio MHD600/4 Amplifier Specs

DIMENSIONS
Height (H)1.93 in / 49 mm
Width (W)10.74 in / 273 mm
Depth (D)8.29 in / 211 mm
Power @ 14.4 V
Power @ 12.5 V
Power @ 14.4 V
OUTPUT POWER SPECS @ 14.4 V
@ 4 Ω150 W RMS x 4
@ 3 Ω150 W RMS x 4
@ 2 Ω150 W RMS x 4
@ 1.5 Ω
150 W RMS x 4
Bridged @ 8 Ω
300 W RMS x 2
Bridged @ 4 Ω
300 W RMS x 2
Power @ 12.5 V
OUTPUT POWER SPECS @ 12.5 V
@ 4 Ω150 W RMS x 4
@ 3 Ω150 W RMS x 4
@ 2 Ω150 W RMS x 4
@ 1.5 Ω150 W RMS x 4
Bridged @ 8 Ω300 W RMS x 2
Bridged @ 4 Ω300 W RMS x 2
General
Signal Processing
General
GENERAL SPECS
Frequency Response6 Hz - 30 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power>110 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W>88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω>300 / 50 Hz
Damping Factor @ 2 Ω>150 / 50 Hz
THD+N @ Rated Power<0.03% @ 4 Ω per Ch.
Input Voltage Range @ RCA InputsSwitchable - Low: 200 mV - 2 V RMS | High: 800 mV - 8 V RMS
 -  Min.Copper Power / Ground Wire Gauge4 AWG wire
Fuse Rating50 A (AFS, AGU or MaxiFuse™)
Signal Processing
SIGNAL PROCESSING
Filter Mode(s)Low-Pass or High-Pass
Filter Slope(s)12/24 dB/octave
Filter Frequency Range50 Hz - 500 Hz
Detented, Calibrated Filter Freq. PotentiometersYes
Filter Defeat FunctionYes
Infrasonic FilterNo
Bass Boost EQNo
Remote Level ControlOptional HD-RLC
Remote Level Modes2 or All Channels
Channel Input Mode SwitchYes : 2/4 CH
Pass-Through Preamp OutputBuffered
Source Channel Selection for PreOutsYes