FELL Marine MOB+ Multiple Stop xFOBs

FELL Marine MOB+ Multiple Stop xFOBs

CONNECTING MULTIPLE FOBS WITH STOP FUNCTION

 

Silhuette-Stop-FOB-Black.png

 

How to connect any of the ALARM FOBs with STOP function. In the event that one (or more) of the ALARM FOBs with STOP function goes overboard, it will trigger automatic engine shut down.
Manual button press on an ALARM FOB connected with STOP function (disconnect) will shut down the engine(s).

 

Pairing-Press-xFOB-Simple.png

CONNECT THE FIRST FOB

Click the button on your xFOB to connect.

ConState_0003_Form-1.png

STOP FOB CONNECTED

When connecting the first xFOB it becomes the STOP FOB. The STOP FOB will automatically shut down the engine(s) if the pilot falls overboard and disconnect the all FOBs.

Morse-Buzzer-connected.png

Press-xHUB-3sek.png

ACTIVATE STOPFUNCTION FOR THE NEXT CONNECTING ALARM FOB CONNECTED

Press and hold the button on the xHUB for 3 seconds to activate STOP function on the next connecting ALARM FOB. The xHUB lights shifts between green and blue.

Morse-Alarm-to-stop.png

Pairing-Press-xFOB-Simple.png

CONNECT ALARM FOB WITH STOP FUNCTION

Immediately after releasing the button on the xHUB, click the button on the next xFOB to be connected as ALARM FOB with STOP function.

Morse-Buzzer-connected.png

Discon-2-3-4.png

Repeat-symbol.png

Repeat step 2.1 and 2.2 to connect successive ALARM FOBs with STOP function

Pairing-Press-xFOB-Simple.png

DISCONNECT

Click the button on your xFOB to disconnect.

Red-xHUB-Light.png

Disconnecting STOP FOB or ALARM FOB with STOP function

Disconnecting the STOP FOB or ALARM FOB with STOP function will shut down the engine(s) and disconnect all FOBs regardless of their connected state.

Morse-Buzzer-disconnect-stop-FOB.png

NOTE:

Any combination of ALARM FOBs with or without STOP function can be connected.
E.g. Connect a new ALARM FOB with only ALARM functionality by one click on the ALARM FOB, going directly to step 2.2. without first performing step 2.1. above, after a previous ALARM FOB with STOP function has been connected.

WARNING:
If the STOP FOB or any of the connected ALARM FOBs with STOP function goes overboard, the xHUB will shut down the engine(s), disconnect all connected FOBs and go into MOB mode. Anyone left on board can restart the engine as normal after 6 seconds without having to reconnect any FOBs or interact with the MOB+ system.

    • Related Articles

    • FELL Marine MOB+ Connecting xFOBs

      The MOB+ allows for the pilot to be connected with his xFOB as a STOP FOB and three more crew members or passengers to be connected as ALARM FOBs. All xFOBs are universal and can either be STOP FOB or ALARM FOB. The first connected xFOB on each boat ...
    • FELL Marine MOB+ Warranty

      This FELL product is warranted to be free from defects in materials or workmanship for two years from the date of purchase. Within this period, FELL will, at its sole option, repair or replace any components that fail in normal use. Such repairs or ...
    • FELL Marine MOB+ Timeout Modes

      Connected - 20hTime-Out: The normal xFOB to xHUB connection will automatically time-out after 20h and shut down your engine(s). This is to prevent unnecessary battery drainage of the xFOB battery. Click xFOB again to reconnect. Override Mode - ...
    • FELL Marine MOB+ Override Mode

      OVERRIDE MODE In the event that you forget your xFOB or if it's out of battery - don't worry. You can easily override MOB+ by holding the button on the xHUB for 10 seconds. The xHUB will give a sound signal and a yellow light signal every 30 seconds ...
    • FELL Marine MOB+ User Manual